Hybrid Resilient
Flooring Resources
Planet-Friendly
Waterproof Flooring
-
100% PVC-Free
-
80% Renewable Organic Core
-
70% Total Recycled Content
-
SplashDefense Technology
-
Pet Scratch Protection 20 Year Warranty
-
CleanProtect® Technology with Antimicrobial Properties
-
8mm Plank + 2mm Attached Pad and Patented Uniclic Joint for Fast, Easy Installation. No Underlayment Required
We recommend waiting until the product is received before scheduling your installation.
Hybrid Resilient Flooring Plank Anatomy
Authentic Wood-Look Design
Dent-Resistant PVC-Free Core
Secure Click-Lock Joint
Balancing Backing Layer
Pre-Attached Underlayment
Hybrid Resilient Flooring Documents
_Page_1.png)
Tips & Tricks
Do I have to use transition molding at each doorway?
Yes. Mohawk Home Hybrid Resilient Flooring is installed as a floating floor and requires the use of T-moldings in doorways less than 32 inches (0.81 m) or if the installation changes directions through the doorway (regardless of doorway size) and in rooms 50 feet (15.24 m) or larger in length or width. Floor movement must not be constrained by glue, nails, screws, hardware or other fixed obstructions. These guidelines must be met for warranty coverage.
What is the expansion width requirement?
3/8 Inch. The expansion width requirement 3/8" width minimum around the perimeter of the flooring and any fixed objects. Once you are done installing your floor, fill all expansion spaces with 3/8" compressible PE foam backer rod and cover with 100% silicone sealant as required by the installation guide and warranty.
Identifying the tongue and groove:
The tongue side of the board is placed along the wall during installation. Make sure to trim off the tongue on the first row along the wall to ensure proper expansion space.
How do I clean the floor?
Occasionally wet mop with water only, using a well wrung out mop. DO NOT pour liquid directly on floor or use an excessively wet mop that will puddle or leave moisture standing on the floor. If needed, use a solution of 1 cup of vinegar per gallon of water OR 1/3 cup non-sudsing ammonia per gallon of water. DO NOT use detergents, abrasive cleaners, soaps, waxes or polishes. Use correct hard surface vacuum tools. DO NOT use rotating beater bars, floor scrubbers, steamers, jet mops, buffers or similar products.
Always read the installation & warranty guide prior to installation