Laminate Flooring Resources
Install in a weekend.
Enjoy for a lifetime.
​​
-
SplashDefense® Waterproof Surface and Water-tight Joints
-
CleanProtect® Technology with Antimicrobial Properties Built in to Protect the Floor
-
10mm Plank + 2mm Attached Pad​ and Patented Uniclic Joint for Fast, Easy Installation. No Underlayment Required
We recommend waiting until the product is received before scheduling your installation. Laminate should be allowed to acclimate inside a climate-controlled area for 24 hours before installation. Inspect each plank. Floor should be installed blending planks from several cartons at the same time to ensure good color and shade mixture throughout the installation.
How to Install 4-In-1 Molding
How to Install Quarter Round
Natural Bevel Laminate Resources
Natural Bevel Laminate Resources
Falcon Hill Hickory Only
General Laminate Resources
Tips & Tricks
Do I have to use transition molding at each doorway?
Yes. Laminate flooring requires the use of T-moldings in doorways 4 ft (1.22m) or less and in rooms 40 feet (12.2 m) or larger in length or width. Floor movement must not be constrained by glue, nails, screws, hardware or other fixed obstructions. These guidelines must be met for warranty coverage.
What is the expansion width requirement?
3/8 Inch. The expansion width requirement 3/8" width minimum around the perimeter of the flooring and any fixed objects. Once you are done installing your floor, fill all expansion spaces with 3/8" compressible PE foam backer rod and cover with 100% silicone sealant as required by the installation guide and warranty.
Identifying the tongue and groove:
The tongue side of the board is placed along the wall during installation. Make sure to trim off the tongue on the first row along the wall to ensure proper expansion space.
How do I clean the floor?
Occasionally wet mop with water only, using a well wrung out mop. DO NOT pour liquid directly on floor or use an excessively wet mop that will puddle or leave moisture standing on the floor. If needed, use a solution of 1 cup of vinegar per gallon of water OR 1/3 cup non-sudsing (aka "clear" or "pure") ammonia per gallon of water. DO NOT use detergents, abrasive cleaners, soaps, waxes or polishes. Use correct hard surface vacuum tools. DO NOT use rotating beater bars, floor scrubbers, steamers, jet mops, buffers or similar products.
Always read the installation & warranty guide prior to installation